This site uses cookies to enhance your web site experience. By continuing to browse or use this site, you are agreeing to our use of cookies. See our privacy policy here.

Affordable Enterprise-Level Storage

The VTrak J5000 Series delivers an affordable high performance SAS solution with advanced enterprise level reliability and functionality. The four external 12 Gb/s SAS ports per I/O module provide the connectivity for large capacity solutions requiring multiple cascaded JBODs, and high bandwidth solutions requiring speed. It features fully redundant I/O modules, power supplies and cooling units, combined with a cable-less system design, providing exceptional data availability even during component failures for the enterprise environment.

Supports Hybrid HDD/SSD Arrays

Fully backward compatible with 6 Gb/s SAS/SATA devices, users have the ability to deploy 3 Gb/s, 6 Gb/s, and 12 Gb/s SAS/SATA HDDs and SSDs in the J5000 Series. Efficient power supplies provide up to 90% power efficiency, which improves TCO by conserving power, reducing heat output, and improving cooling costs. The internal 12 Gb/s SAS expander-based architecture also allows for transparent access to each drive, enabling full utilization of the power management features built into modern hard drives.

Increased Performance to Optimize Datacenters

The VTrak J5000 Series moves data at incredible speeds, allowing you to optimize your datacenter. Administrators can deploy with the fastest SAS bus speed with 12 Gb/s HDDs or SSDs. These systems are fully backward compatible with 6 Gb/s SAS/SATA drives, yet are still able to optimize the full port bandwidth of 12 Gb/s to the host. Flash arrays allow you to optimize speed for key enterprise apps that require utmost performance. The internal 12 Gb/s SAS expander-based architecture allows for data to transfer faster with greater redundancy protection.

Models

  • Features

    • VTrak J5000 Series 12 Gb/s SAS subsystems deliver a high-performance SAS solution with advanced enterprise level reliability and functionality
    • 24 hot-swappable 2.5” (SFF) drive bays in a high-density 2U chassis
    • Supports SAS and SATA drives simultaneously and is compatible with leading SAS & SATA drives, HBAs, and RAID controllers
    • Dual active/active SAS JBOD I/O modules provide redundant data paths to ensure data availability and redundant hot-swappable Field Replaceable Units (FRUs)
    • Flexible wide-port configuration: Four x4 wide ports, two x8 wide ports or one x16 wide port per IOM and SES-2 compliant enclosure management
  • Specifications

    Specifications

    Form Factor
    2U/24 Bay
    Drive Support
    • Up to 24 2.5” drives
    • 3/6/12 Gb/s SAS, 3/6 Gb/s SATA HDD and SSD
    • Supports any mix of SAS and SATA drives simultaneously in the same enclosure
    External I/O Ports (per controller)
    Each SBB 2.0 I/O module has four SAS ports using industrial standard Mini SAS HD connectors (SFF-8644), one port supports Wake-on SAS feature for upstream and other ports can be either upstream or downstream for cascading additional JBODs.
    Expander Management Features
    • Self-configuring expander supports full SAS domain topology management
    • T-10 based zoning support is applicable for non-VTrak E-Class configurations
    • End Device Frame Buffering (aggregate bandwidth over multiple slow devices e.g. 6 Gb/s and 3 Gb/s)
    • Smart cable support to detect cable type and tune PHY automatically for maximum reliability
    • SMP – SAS Management Protocol
    • In-band access to Expander and PHY information
    • Statistic counters and performance monitors
    • SES EM– SES Enclosure Management (ANSI T10 SES 2 Compliant)
    • SCSI SES command set over virtual SSP device
    • Wake-on-SAS support, Wake-on-LAN support
    Management Interfaces
    • LED status indicator support for drives, FRU and enclosure environmentals
    • In--band SES enclosure management alerts user to out of spec operation: thermal condition, voltage condition or component failures, protecting data and hardware
    • Full subsystem management CLI through out--of--band RS232 serial port
    Enclosure Protocol and Management
    • ANSI T10 SES 2, SMP (SES over in-band SAS)
    • Persistence Error Logging with NVRAM, Extensive Service Report File, VPD (Vital Product Data) on Chassis and FRUs
    Voltage
    100-240 Vac Auto-Ranging
    Current (Maximum)
    9A @ 100 Vac; 4A @ 240 Vac
    Power Conversion Efficiency
    >80% @ 110V (>20% load), >80% @ 240V (>20% load) Temperature Range
    Temperature
    Operational: 5° to 40°C, Non-Operational: -40° to 60°C
    Humidity
    Operational: 10% to 90% (Non-Condensing), Non-Operational: 5% to 95% (Non-Condensing)
    Acoustic Noise Levels
    55 dB (Typical), 65 dB (Maximum)
    Shock
    Operational: 5G, 11ms duration, Non-Operational: 10G, 11ms duration
    Vibration
    Operational: 0.3G, 5 to 500 Hz, Non-Operational: 1G, 5 to 500 Hz
    Environment Standards
    RoHS, GreenPC, WEEE
    Power Supply
    Efficient 80PLUS GOLD Certified redundant PSU
    Weight
    13.8Kg(30.4lbs) w/o drives
    19.2Kg (43.3 lbs) w/ drives
    Dimensions
    88mm x 446.7mm x 420mm
    (3.5” x 17.6” x 16.5”)
    Warranty
    3-year full system limited warranty, optional extended warranty, onsite parts replacement program
    Support
    24/7 web and phone support, 24/7 access to PROMISE site Software, firmware, and compatibility list
  • Resources

    News

    PROMISE Technology’s Leading RAID Storage Solutions for Rich Media Now Available in Middle East & South Korea

    March 12, 2024

    PROMISE Technology, a leader in RAID storage and streaming data solutions, is announcing its full suite of Rich Media solutions are now available across the Middle East and South Korea through its distribution partners.

    PROMISE Technology Raises the Bar with PromiseRAID & Boost Technologies

    March 23, 2023

    PROMISE Technology, a leading global provider of streaming data storage solutions, is making significant strides in the surveillance industry in 2023 with its proprietary PromiseRAID and Boost Technologies. With the addition of Boost Technology products to its lineup, PROMISE is expanding its storage optimization solutions, highlighting the value-added solutions it offers to its customers in the rich media, surveillance, and IT industries.

    Drivers / Utilities / Firmware

    Documents

  • Related Products

    VTrak Ex30 RAID Subsystems Series

    The PROMISE VTrak x30 Series of intelligent, high availability RAID storage subsystems has fundamentally changed storage economics. From purchase and set up, to operation and upgrade, PROMISE storage offers unmatched performance, reliability and value.

    Learn More

    VTrak Jx30 Expansion Chassis Series

    Providing up to 24Gb/s of bandwidth over the external multilane 6G SAS host interface, the VTrak x30 series allows storage applications to access their data at blistering speeds. The 6G SAS architecture paves the way for immense available bandwidth to support the flood of unstructured data now flowing across networks today.

    Learn More

Copyright ©2024 PROMISE Technology Inc. All rights reserved. / Terms Of Use / Privacy Policy / Contact Us